TPA

Centrifugal low and medium-pressure fan. Open blade impeller. Directly coupled motor.


Centrifugal low and medium-pressure fan. Open blade impeller. Directly coupled motor.
Air flow
V = 480÷7.500 m3/h
Pressure
Pt = 70÷370 kg/m2

Use: for the suction of very dusty air containing various types of materials in suspension. These types of fans are mainly used in the following industries:
joinery works: for the transport of saw dust and wooden shavings;
tanneries: for the transport of trimmings and skin shavings;
industries for plastic articles: for the transport of granulates.

The temperature of the fluid sucked in must not exceed 80°C.

ErP: these fans are covered by Directive 2009/125/EC. This law does not apply in the following cases:
- Operation in potentially explosive atmospheres (ATEX)
- Operation with high temperatures (fans designed with cooling fan)
- Operation with temperatures below -40°C
- Working in toxic, corrosive or abrasive enviroments (use of material such as AISI 304, AISI 316, manganese steels).
These series are centrifugal forward curved fans and therefore expected Ntarget = 42 (Reg. UE N.327/2011).
ErP calculations take into account efficiency IE2 motors conforming to IEC 60034-30.
Please note that these fans are designed for transporting material. For this reason the Directive 2009/125/CE is applied, but they are not subject to the constraints of energy efficiency that it imposes and therefore neither to the verification of these parameters.

* = The fans are not on our Price List, production on request.

Air flow -m3/min
Inlet pressure -kg/m2
Outlet pressure -kg/m2
Engine installed -poles
Installed power KW
Rotation speed round/min
Limit speed round/min
Fluid type
Inlet flange mm
Outlet flange xmm
Weight without engine Kg
GD2 Kgm2

General notes: